Qwas Dogs for the Festool MFT/3

September 23rd, 2008

We are proud to introduce and sell Qwas Dogs, the first precision bench dog. Why a precision bench dog? If you look at the Festool and Walko work tables, you will notice the holes are set in a precise grid. With Qwas Dogs you can take advantage of that grid to make perfect cuts, whether cross cuts, rip cuts, or 45 degree cuts (Festool MFT only). 2 pairs of Qwas Dogs allows you test the squareness of work pieces, squares, or help in glueing up your projects. Qwas Dogs are great for holding a workpiece while sanding, sawing, planing, or glueing up a project. Anything that requires holding your workpiece still or requires a perfect 90 degree angle, Qwas Dogs will work.

Qwas Dogs are sold as a matched pair. Each pair is inspected to assure diameters within .001 (1 thousandths) of an inch. Are you planning on using 2 pairs or more? All Qwas Dogs  pairs are tested to be within 3 thousandths of an inch to each other (+.001, -002).

Qwas Dogs are designed to utilized the full depth of the holes for proper alignment. Qwas Dogs tapered shoulders are designed to fit the holes perfectly. The small shoulders assures the dogs are aligned with the hole rather than inaccuracies in the table surface from glue, saw kerfs, or water spillage.

Qwas Dogs sit less than 7/16 inch above the table top allowing you to work on anything from 1/2 plywood to 12/4 hardwood. Perfect for sanding and sawing 1/2 inch plywood. If you regularly work on thinner material, we can special order a thinner head to accommodate.

When you understand the precise grid CNC layout on these great work tables have, why use anything less than a precision bench dog, the Qwas Dog.

Bench Dogs for your MFT

Bench Dogs for your MFT

Festool Junkie is honored to announce the roll-out for the Qwas Dogs (kwas dogs).  They are now being offered exclusively through Festool Junkie for $29.95.  Made in Valdosta, Georgia, these little “pups” are an essential for those of us doing bench work on the MFT’s, or needing to reference the hole patterns for squaring panels.

Buy your Qwas Dogs Here!!!  BUY QWAS DOGS

Timmy C

One Response to “Qwas Dogs for the Festool MFT/3”

  1. Steve Adams Says:

    We now have a website with more details. Please visit http://www.qwasproducts.com

Trackbacks/Pingbacks

Leave a Reply

RSS | XHTML | CSS